Lightweight

Pair of Series 2A Bulkhead Brackets

Laser cut and CNC bent replacements for Land rover part no.’s 537535 & 537533 Made from 3mm steel and hot dip Galvanized. Very high quality. Supplied as a matching pair.

Series 2a Steering Box Bracket ( RHD Only )

Top Quality reproduction of Land rover part no. 537537 Laser cut and CNC bent made from 2.5mm steel and hot dip  Galvanized,100% accurate.

Military Lightweight Floor Plates - Pair  335666 & 335667

Pair of floor plates for the Land Rover Lightweight Brand New – Laser Cut 100% accurate, Better than OEM. Very high quality items supplied as a matching pair.

Lightweight 2a Front Rad / Panel Repair Sections

One pair of S2a Lightweight front panel repair sections  – Laser Cut – accurate, very good fit.  Made from 1.2mm uncoated steel (original thickness). High quality items supplied as a matching pair.

Lightweight complete Rear Floor Series 2a & S3

Laser cut replacement for the longer available Lightweight full rear floor. Made from 5083 alloy & assembled with solid flush aircraft rivets. Very high quality.
Details Details

Top Windscreen Rail For Canvas Hood 330575

Top Quality reproduction of the ‘no longer available’ Land Rover part number 330575
Details Details

Lightweight - High / Low Lever Gaiter Retainer 303817

Better than OEM quality reproduction of Land Rover part number 303817 Identical to the OEM part, but made from 316 Stainless steel.
Details

Series 2a 3 88” Rear Body Floor Top Hat Sections

Set of the 3 replacement ‘Top Hat’ sections for repairing the Lightweight rear floor, these items run longways under the rear body floor.

Lightweight Front Rad / Panel Bottom Edge Repair Angle

Repair section for the bottom edge of the Lightweight S2a/S3 front panel.  – Laser Cut – quality part. Made from 2.5 mm uncoated steel.
Details Details Details Details

Lightweight S3 Front / Rad Panel Repair Sections

One pair of Series 3 Lightweight front panel repair sections  – Laser Cut – accurate, very good fit. Made from 1.2mm uncoated steel High quality items supplied as a matching pair.
Details

Pair of Series 3 Bulkhead Brackets

Laser cut and CNC bent replacement for Land rover part no.’s 592984 & 592985 Made from 3mm steel and hot dip Galvanized. Very high quality, Supplied as a matching pair.
Details

Series 3 Steering Box Bracket ( RHD Only )

Top Quality reproduction of Land Rover part no. 90577264

Laser cut and CNC bent made from 2.5mm steel and hot dip

Galvanized. 100% accurate.

Details
Items: Total:
Parts for Land Rover S2a & S3 Military Air Portable

Lightweight - RHD Exhaust Mounting - Full Kit

Lightweight S2a / 3  Petrol & Diesel Exhaust mounting kit  complete. Laser cut from ‘316’ grade stainless steel. All nuts,  bolts & fittings required (A2 Stainless metric) are included.
Details Details

Lightweight - LHD Exhaust Mounting - Full Kit

Lightweight S2a / 3  Petrol & Diesel Exhaust mounting kit  complete. Laser cut from ‘316’ grade stainless steel. All nuts,  bolts & fittings required (A2 Stainless metric) are included.

Series 2&3 Bonnet Spare Wheel Buffers MRC5627

Rubber Buffers for the Bonnet Mounted Spare Wheel set of 4. Replaces Land Rover part number mrc5627.
Details

Rear Body Tub Rubber Mounting Pads 332582 - Pack of 6

Rear Lower Body to Chassis Rubber Mountings. Size 55mm x 32mm x 5mm - Holes Ø 6mm  
Details
Bits4Landys
© 2017 Bits4Landys Ltd. all rights reserved - Bits4Landys are independent non-franchised manufacturers & suppliers of parts for the Classic Land-Rover Marque LAND ROVER® and DEFENDER® are registered trade marks of Jaguar Land Rover Limited.

Lightweight

Bits4Landys

Pair of Series 2A Bulkhead Brackets

Laser cut and CNC bent replacements for Land rover part no.’s 537535 & 537533 Made from 3mm steel and hot dip Galvanized. Very high quality. Supplied as a matching pair.

Series 2a Steering Box Bracket ( RHD Only )

Top Quality reproduction of Land rover part no. 537537 Laser cut and CNC bent made from 2.5mm steel and hot dip  Galvanized,100% accurate.

Military Lightweight Floor Plates - Pair  335666 & 335667

Pair of floor plates for the Land Rover Lightweight Brand New – Laser Cut 100% accurate, Better than OEM. Very high quality items supplied as a matching pair.

Lightweight 2a Front Rad / Panel Repair Sections

One pair of S2a Lightweight front panel repair sections  – Laser Cut – accurate, very good fit.  Made from 1.2mm uncoated steel (original thickness). High quality items supplied as a matching pair.

Lightweight complete Rear Floor Series 2a & S3

Laser cut replacement for the longer available Lightweight full rear floor. Made from 5083 alloy & assembled with solid flush aircraft rivets. Very high quality.
Details Details

Top Windscreen Rail For Canvas Hood 330575

Top Quality reproduction of the ‘no longer available’ Land Rover part number 330575
Details Details

Lightweight - High / Low Lever Gaiter Retainer 303817

Better than OEM quality reproduction of Land Rover part number 303817 Identical to the OEM part, but made from 316 Stainless steel.
Details

Series 2a 3 88” Rear Body Floor Top Hat Sections

Set of the 3 replacement ‘Top Hat’ sections for repairing the Lightweight rear floor, these items run longways under the rear body floor.

Lightweight Front Rad / Panel Bottom Edge Repair Angle

Repair section for the bottom edge of the Lightweight S2a/S3 front panel.  – Laser Cut – quality part. Made from 2.5 mm uncoated steel.
Details Details Details Details

Lightweight S3 Front / Rad Panel Repair Sections

One pair of Series 3 Lightweight front panel repair sections  – Laser Cut – accurate, very good fit. Made from 1.2mm uncoated steel High quality items supplied as a matching pair.
Details

Pair of Series 3 Bulkhead Brackets

Laser cut and CNC bent replacement for Land rover part no.’s 592984 & 592985 Made from 3mm steel and hot dip Galvanized. Very high quality, Supplied as a matching pair.
Details

Series 3 Steering Box Bracket ( RHD Only )

Top Quality reproduction of Land Rover part no. 90577264

Laser cut and CNC bent made from 2.5mm steel and hot dip

Galvanized. 100% accurate.

Details
Items: Total:
Parts for Land Rover S2a & S3 Military Air Portable

Lightweight - RHD Exhaust Mounting - Full Kit

Lightweight S2a / 3  Petrol & Diesel Exhaust mounting kit  complete. Laser cut from ‘316’ grade stainless steel. All nuts,  bolts & fittings required (A2 Stainless metric) are included.
Details
Details

Lightweight - LHD Exhaust Mounting - Full Kit

Lightweight S2a / 3  Petrol & Diesel Exhaust mounting kit  complete. Laser cut from ‘316’ grade stainless steel. All nuts,  bolts & fittings required (A2 Stainless metric) are included.

Series 2&3 Bonnet Spare Wheel Buffers MRC5627

Rubber Buffers for the Bonnet Mounted Spare Wheel set of 4. Replaces Land Rover part number mrc5627.
Details

Rear Body Tub Rubber Mounting Pads 332582 - Pack of 6

Rear Lower Body to Chassis Rubber Mountings. Size 55mm x 32mm x 5mm - Holes Ø 6mm  
Details
© 2017 Bits4Landys Ltd. all rights reserved - Bits4Landys are independent non-franchised manufacturers & suppliers of parts for the Classic Land-Rover™ Marque LAND ROVER® and DEFENDER® are registered trade marks of Jaguar Land Rover Limited.