S2/3 Galvanized Parts

Series 2 2a 3 Galvanized Steel Parts
© 2017 Bits4Landys Ltd. all rights reserved - Bits4Landys are independent non-franchised manufacturers & suppliers of parts for the Classic Land-Rover Marque LAND ROVER® and DEFENDER® are registered trade marks of Jaguar Land Rover Limited.

Series 2 2a 3 Front Wing STAYS 332581 - Pair

Laser cut & CNC Bent replacements of LR part no. 332581 100% accurate, 3mm Steel. Hot Dip Galvanized. Very high quality.

Series 3  Rear Sill Channel Bracket 347436

Laser cut & CNC bent replacement for part number 347436. Made from 2mm steel and hot dip Galvanized

Series 2 2a 3 SWB Truck Cab Filler Plate

High quality reproduction of the no longer available Land Rover part no. 346325. This part is often missing when you want to fit a truck cab to a short wheel base

Series 2 2a  Rear Sill Channel Bracket 347436

Laser cut & CNC bent replacement for part number 347436. Made from 2mm steel and hot dip Galvanized

Bulkhead Brackets Series 2a - Pair

Laser cut and CNC bent replacements for LR part no.’s 537535 & 537533. Made from 3mm steel and hot dip Galvanized. Very high quality - Supplied as a matching pair.

Series 2a Steering Box Bracket ( RHD only)

Top Quality replacement for LR part no. 537537 Laser cut and CNC bent made from 2.5mm steel and hot dip Galvanized, 100% accurate.

Series 3 Bulkhead Brackets - Pair

Laser cut and CNC bent replacement for LR part no.’s 592984 & 592985. Made from 3mm steel and hot dip Galvanized. Very high quality - Supplied as a matching pair.

Series 2 2a 3 Rear Wing STAYS 330303 330304

Laser cut & CNC Bent replacements for SWB Part no. 330303 & 330304 - 3mm Steel, Hot Dip Galvanized. Very high quality.

Series 2/3  Rear Body Stay Brackets (pair)

Pair of Series 1958 - 1984 Rear Body Wing Stay Brackets. Laser cut / CNC formed copies of Land Rover part number 332521 -  Hot dip Galvanized.

Series 2 2a 3 SWB Galvanized Body Stay Set

Full set of 6 Series 58-84 88inch SWB Stay Brackets. Laser cut / CNC formed replacements for part numbers 330303  *1   330304  *1  332521 *2   332581  *2

S2 , 2a , 3  109” LWB Station Wagon Sill Brackets

Top Quality reproduction of the no longer available LR parts no’s 333259 and 333260. Laser cut and CNC bent from 3mm steel and hot dip galvanized. Supplied as matching pair.

Series 2 2a  Deep Sill Bracket 330389

Laser cut & CNC bent replacement for the no longer available part no. 330389. Fits SWB & LWB - not handed, same part on both sides. Use 4 on the 88” and 6 off on 109” Made from 2mm steel and hot dip Galvanized - 100% accurate.
Details Details Details

Top Windscreen Rail For Canvas Hood 330575

Brand new Top Quality reproduction of the ‘no longer available’ LR part number 330575
Details Details Details Details Details Details Details Details Details Details Details

Series 3 Steering Box Bracket ( RHD only)

Top Quality replacement for LR part no. 90577264 - Laser cut and CNC bent made from 2.5mm steel and hot dip Galvanized, 100% accurate.

Series 2,2a Galvanized Wing Mounting Brackets (pair)

Top quality reproductions of the no longer available LR part numbers 330067 / 338653 and 330068 / 338652
Details

Series 3 Galvanized Wing Mounting Brackets (pair)

Top quality reproductions of the no longer available LR part numbers MRC5504 and MRC5505
Details

Bulkhead Brackets Series 2

Laser cut and CNC bent replacements for LR part no.’s 277294 & 277295. Made from 3mm steel and hot dip Galvanized. Very high quality. Supplied as a matching pair.
Details

Series 2 3 Galvanized Front Towing Lifting Eye 24213

Laser cut 10mm Base, ¾” Wire Loop. Reproduction of part number 242139 / NRC5942 
Details

Series 2/3 Lower Seat Belt Brackets

Laser cut ,CNC bent & Galvanized replacements for Landrover part numbers  345100 & 345101
Details

Series 2 2a 3 Front Bumper Bumperettes (pair)

Laser cut from 2.5 mm steel. Replaces Land Rover part number RTC 4769 / 552074 Supplied as matching pair.
Details

Series 2 2a 3 Front Bumper Galvanised

Laser cut from 2.5 mm steel (original thickness) and hot dip Galvanised. Replaces part number 564704.
Details

Series 2 2a 3 Bottom Infill Panel LH Wing SWB

Laser cut CNC folded and hot dip Galvanised. Replaces Land Rover part number 330443.
Details

Series 2 2a 3 Galvanized Washer Bottle Bracket

Top Quality reproduction of the no longer available windscreen washer bottle mounting bracket. Replaces part number 345654.
Details
Items: Total:
Bits4Landys

S2/3 Galvanized Parts

Bits4Landys Series 2 2a 3 Galvanized Steel Parts

Series 2 2a 3 Front Wing STAYS 332581 - Pair

Laser cut & CNC Bent replacements of LR part no. 332581 100% accurate, 3mm Steel. Hot Dip Galvanized. Very high quality.

Series 3  Rear Sill Channel Bracket 347436

Laser cut & CNC bent replacement for part number 347436. Made from 2mm steel and hot dip Galvanized

Series 2 2a 3 SWB Truck Cab Filler Plate

High quality reproduction of the no longer available Land Rover part no. 346325. This part is often missing when you want to fit a truck cab to a short wheel base

Series 2 2a  Rear Sill Channel Bracket 347436

Laser cut & CNC bent replacement for part number 347436. Made from 2mm steel and hot dip Galvanized

Bulkhead Brackets Series 2a - Pair

Laser cut and CNC bent replacements for LR part no.’s 537535 & 537533. Made from 3mm steel and hot dip Galvanized. Very high quality - Supplied as a matching pair.

Series 2a Steering Box Bracket ( RHD only)

Top Quality replacement for LR part no. 537537 Laser cut and CNC bent made from 2.5mm steel and hot dip Galvanized, 100% accurate.

Series 3 Bulkhead Brackets - Pair

Laser cut and CNC bent replacement for LR part no.’s 592984 & 592985. Made from 3mm steel and hot dip Galvanized. Very high quality - Supplied as a matching pair.

Series 2 2a 3 Rear Wing STAYS 330303 330304

Laser cut & CNC Bent replacements for SWB Part no. 330303 & 330304 - 3mm Steel, Hot Dip Galvanized. Very high quality.

Series 2/3  Rear Body Stay Brackets (pair)

Pair of Series 1958 - 1984 Rear Body Wing Stay Brackets. Laser cut / CNC formed copies of Land Rover part number 332521 -  Hot dip Galvanized.

Series 2 2a 3 SWB Galvanized Body Stay Set

Full set of 6 Series 58-84 88inch SWB Stay Brackets. Laser cut / CNC formed replacements for part numbers 330303  *1   330304  *1  332521 *2   332581  *2

S2 , 2a , 3  109” LWB Station Wagon Sill Brackets

Top Quality reproduction of the no longer available LR parts no’s 333259 and 333260. Laser cut and CNC bent from 3mm steel and hot dip galvanized. Supplied as matching pair.

Series 2 2a  Deep Sill Bracket 330389

Laser cut & CNC bent replacement for the no longer available part no. 330389. Fits SWB & LWB - not handed, same part on both sides. Use 4 on the 88” and 6 off on 109” Made from 2mm steel and hot dip Galvanized - 100% accurate.
Details Details Details

Top Windscreen Rail For Canvas Hood 330575

Brand new Top Quality reproduction of the ‘no longer available’ LR part number 330575
Details Details Details Details Details Details Details Details Details Details Details

Series 3 Steering Box Bracket ( RHD only)

Top Quality replacement for LR part no. 90577264 - Laser cut and CNC bent made from 2.5mm steel and hot dip Galvanized, 100% accurate.

Series 2,2a Galvanized Wing Mounting Brackets (pair)

Top quality reproductions of the no longer available LR part numbers 330067 / 338653 and 330068 / 338652
Details

Series 3 Galvanized Wing Mounting Brackets (pair)

Top quality reproductions of the no longer available LR part numbers MRC5504 and MRC5505
Details

Bulkhead Brackets Series 2

Laser cut and CNC bent replacements for LR part no.’s 277294 & 277295. Made from 3mm steel and hot dip Galvanized. Very high quality. Supplied as a matching pair.
Details

Series 2 3 Galvanized Front Towing Lifting Eye 24213

Laser cut 10mm Base, ¾” Wire Loop. Reproduction of part number 242139 / NRC5942 
Details

Series 2/3 Lower Seat Belt Brackets

Laser cut ,CNC bent & Galvanized replacements for Landrover part numbers  345100 & 345101
Details

Series 2 2a 3 Front Bumper Bumperettes (pair)

Laser cut from 2.5 mm steel. Replaces Land Rover part number RTC 4769 / 552074 Supplied as matching pair.
Details

Series 2 2a 3 Front Bumper Galvanised

Laser cut from 2.5 mm steel (original thickness) and hot dip Galvanised. Replaces part number 564704.
Details

Series 2 2a 3 Bottom Infill Panel LH Wing SWB

Laser cut CNC folded and hot dip Galvanised. Replaces Land Rover part number 330443.
Details

Series 2 2a 3 Galvanized Washer Bottle Bracket

Top Quality reproduction of the no longer available windscreen washer bottle mounting bracket. Replaces part number 345654.
Details
Items: Total:
© 2017 Bits4Landys Ltd. all rights reserved - Bits4Landys are independent non-franchised manufacturers & suppliers of parts for the Classic Land-Rover™ Marque LAND ROVER® and DEFENDER® are registered trade marks of Jaguar Land Rover Limited.