S2/3 Front Body Parts

Fwd Body for Land Rover Series 2 2a 3

Floor Plates 3mm for Series 2/3 (4 Cylinder)

Front 2/3 floor plates for Land Rover Series – Laser Cut – 100% accurate, Made from 3mm smooth aluminium These are the best series floor plates you can get.

Chequer Floor Plates 3mm for Series 2/3 (4 Cyl)

Land Rover Series 2/3 floor plates – Laser Cut – 100% accurate, Made from 3mm chequer plate. These are the best series floor plates you can get.

S2 2a 3 Front Wing STAYS 332581 pair

Laser cut & CNC Bent replacement of Landrover Part no. 332581 100% accurate, 3mm Steel, Hot Dip Galvanized. Very high quality.

Series 3  Rear Sill Channel Bracket 347436

Laser cut & CNC bent replacement for Landrover part no. 347436. Made from 2mm steel and hot dip Galvanized.

Truck Cab Filler Plate 346325 for Series 2 2a 3 SWB

High quality reproduction of the no longer available part no. 346325. This part is often missing when you want to fit a truck cab to a short wheel base (a lot of truck cabs were fitted to the LWB  which do not need this part)

Series 2 2a  Rear Sill Channel Bracket 347436

Laser cut & CNC bent replacement for Landrover part no. 347436. Made from 2mm steel and hot dip Galvanized.

Series 2 2a  Deep Sill Bracket 330389

Laser cut & CNC bent replacement for the no longer available Landrover part no. 330389. Fits SWB & LWB - not handed, same part on both sides. Use 4 on the 88” and 6 off on 109” Made from 2mm steel and hot dip Galvanized.
Details Details Details

Series 3 Front Panel Bottom Edge

Pair of weld on repair sections for bottom edge of the s3 front panel. For s3 / s2a front panel with headlights in wings only.
Details

Series 2 2a Front Panel Bottom Edge

Pair of weld on repair sections for bottom edge of the S2/2a front panel. For s2 / s2a front panel with headlights in front panel only.
Details Details Details Details Details

Series 2 S3 - High / Low Lever Gaiter Retainer 303817

Brand new top quality reproduction of part number 303817 Identical to the OEM part, but made from 316 Stainless steel.
Details

S2 & S2a Galvanized Wing Mounting Brackets (pair)

Top quality reproductions of the no longer available Land Rover part numbers 330067 / 338653 and 330068 / 338652
Details

S3 Galvanized Wing Mounting Brackets (pair)

Top quality reproductions of the no longer available part numbers MRC5504 and MRC5505 for the Series 3
Details

Top Windscreen Rail For Canvas Hood 330575

Brand new Top Quality reproduction of the ‘no longer available’ LR part number 330575
Details

Series 2 / S2a Under Bonnet Tool Box - No Latch Fitted

Brand new, exact 100% reproduction of the Land Rover optional under bonnet box as fitted to many S2a military vehicles.
Details

Series 2 3 Galvanized Front Towing Lifting Eye 24213

Laser cut 10mm Base, ¾” Wire Loop. Reproduction of Land Rover part number 242139 / NRC5942 
Details

Lower Seat Belt Brackets for Series 2/3

Laser cut ,CNC bent & Galvanized replacements for Landrover part numbers  345100 & 345101
Details

S2 2a 3 Front Bumper Bumperettes (pair)

Laser cut from 2.5 mm steel. Replaces part number RTC 4769 / 552074 Supplied as matching pair.
Details

S2 2a 3 Front Bumper Galvanised

Laser cut from 2.5 mm steel (original thickness) and hot dip Galvanised. Replaces Land Rover part number 564704.
Details

Series 2 2a 3 Bottom Infill Panel LH Wing SWB

Laser cut CNC folded and hot dip Galvanised. High quality reproduction of the no longer available part number 330443.
Details

Series Mirror Arms - Stainless Steel - 562912

Pair of High Quality Replacement Mirror Arms Stainless Steel Replaces part number 562912
Details

Exterior Sun Visor Kit 90608551 for Series 2 S3

Brand new top quality reproduction of Land Rover part number 90608551 Identical to the OEM part, Very high quality item. The bends are all the correct radius and are not 'step' folded like cheaper versions of this part.
Details
Items: Total:
Details

Bonnet Spare Wheel Buffers MRC5627

Rubber Buffers for the Bonnet Mounted Spare Wheel set of 4. Replaces Land Rover part number mrc5627.
Details

Series Mirror Arms - Stainless - 562912 BLACK

Pair of High Quality Replacement Mirror Arms Stainless Steel, Powder Coated in Gloss Black. Replaces part number 562912
Bits4Landys
© 2017 Bits4Landys Ltd. all rights reserved - Bits4Landys are independent non-franchised manufacturers & suppliers of parts for the Classic Land-Rover Marque LAND ROVER® and DEFENDER® are registered trade marks of Jaguar Land Rover Limited.

Series 2 2a 3 Galvanized Washer Bottle Bracket

Top Quality reproduction of the no longer available windscreen washer bottle mounting bracket. Replaces part number 345654.
Details

Check Strap Buffers 306471 for Series 2 S2a

Pair of Rubber Buffers for the Series 2 & S2a front door check straps. Replaces Land Rover part number 306471
Details

S2/3 Front Body Parts

Bits4Landys Fwd Body for Land Rover Series 2 2a 3

Floor Plates 3mm for Series 2/3 (4 Cylinder)

Front 2/3 floor plates for Land Rover Series – Laser Cut – 100% accurate, Made from 3mm smooth aluminium These are the best series floor plates you can get.

Chequer Floor Plates 3mm for Series 2/3 (4 Cyl)

Land Rover Series 2/3 floor plates – Laser Cut – 100% accurate, Made from 3mm chequer plate. These are the best series floor plates you can get.

S2 2a 3 Front Wing STAYS 332581 pair

Laser cut & CNC Bent replacement of Landrover Part no. 332581 100% accurate, 3mm Steel, Hot Dip Galvanized. Very high quality.

Series 3  Rear Sill Channel Bracket 347436

Laser cut & CNC bent replacement for Landrover part no. 347436. Made from 2mm steel and hot dip Galvanized.

Truck Cab Filler Plate 346325 for Series 2 2a 3 SWB

High quality reproduction of the no longer available part no. 346325. This part is often missing when you want to fit a truck cab to a short wheel base (a lot of truck cabs were fitted to the LWB  which do not need this part)

Series 2 2a  Rear Sill Channel Bracket 347436

Laser cut & CNC bent replacement for Landrover part no. 347436. Made from 2mm steel and hot dip Galvanized.

Series 2 2a  Deep Sill Bracket 330389

Laser cut & CNC bent replacement for the no longer available Landrover part no. 330389. Fits SWB & LWB - not handed, same part on both sides. Use 4 on the 88” and 6 off on 109” Made from 2mm steel and hot dip Galvanized.
Details Details Details

Series 3 Front Panel Bottom Edge

Pair of weld on repair sections for bottom edge of the s3 front panel. For s3 / s2a front panel with headlights in wings only.
Details

Series 2 2a Front Panel Bottom Edge

Pair of weld on repair sections for bottom edge of the S2/2a front panel. For s2 / s2a front panel with headlights in front panel only.
Details Details Details Details Details

Series 2 S3 - High / Low Lever Gaiter Retainer 303817

Brand new top quality reproduction of part number 303817 Identical to the OEM part, but made from 316 Stainless steel.
Details

S2 & S2a Galvanized Wing Mounting Brackets (pair)

Top quality reproductions of the no longer available Land Rover part numbers 330067 / 338653 and 330068 / 338652
Details

S3 Galvanized Wing Mounting Brackets (pair)

Top quality reproductions of the no longer available part numbers MRC5504 and MRC5505 for the Series 3
Details

Top Windscreen Rail For Canvas Hood 330575

Brand new Top Quality reproduction of the ‘no longer available’ LR part number 330575
Details

Series 2 / S2a Under Bonnet Tool Box - No Latch Fitted

Brand new, exact 100% reproduction of the Land Rover optional under bonnet box as fitted to many S2a military vehicles.
Details

Series 2 3 Galvanized Front Towing Lifting Eye 24213

Laser cut 10mm Base, ¾” Wire Loop. Reproduction of Land Rover part number 242139 / NRC5942 
Details

Lower Seat Belt Brackets for Series 2/3

Laser cut ,CNC bent & Galvanized replacements for Landrover part numbers  345100 & 345101
Details

S2 2a 3 Front Bumper Bumperettes (pair)

Laser cut from 2.5 mm steel. Replaces part number RTC 4769 / 552074 Supplied as matching pair.
Details

S2 2a 3 Front Bumper Galvanised

Laser cut from 2.5 mm steel (original thickness) and hot dip Galvanised. Replaces Land Rover part number 564704.
Details

Series 2 2a 3 Bottom Infill Panel LH Wing SWB

Laser cut CNC folded and hot dip Galvanised. High quality reproduction of the no longer available part number 330443.
Details

Series Mirror Arms - Stainless Steel - 562912

Pair of High Quality Replacement Mirror Arms Stainless Steel Replaces part number 562912
Details

Exterior Sun Visor Kit 90608551 for Series 2 S3

Brand new top quality reproduction of Land Rover part number 90608551 Identical to the OEM part, Very high quality item. The bends are all the correct radius and are not 'step' folded like cheaper versions of this part.
Details
Items: Total:
Details

Series Mirror Arms - Stainless - 562912 BLACK

Pair of High Quality Replacement Mirror Arms Stainless Steel, Powder Coated in Gloss Black. Replaces part number 562912

Bonnet Spare Wheel Buffers MRC5627

Rubber Buffers for the Bonnet Mounted Spare Wheel set of 4. Replaces Land Rover part number mrc5627.
Details
© 2017 Bits4Landys Ltd. all rights reserved - Bits4Landys are independent non-franchised manufacturers & suppliers of parts for the Classic Land-Rover™ Marque LAND ROVER® and DEFENDER® are registered trade marks of Jaguar Land Rover Limited.

Series 2 2a 3 Galvanized Washer Bottle Bracket

Top Quality reproduction of the no longer available windscreen washer bottle mounting bracket. Replaces part number 345654.
Details

Check Strap Buffers 306471 for Series 2 S2a

Pair of Rubber Buffers for the Series 2 & S2a front door check straps. Replaces Land Rover part number 306471
Details