Laser cut reproduction of the longer available LR part no. 330267. Made from 5083 alloy & assembled with solid flush aircraft rivets. Very high quality.
S2/3 Rear Body Angle Mounting 330271
Laser Cut & CNC Folded replacement for part no. 330271. Very high quality, the bend dimensions & radius are 100% accurate. Made from ‘5083’ high strength marine grade aluminium alloy.
Back / Rear Body Repair Panels (pair)
Pair of Rear Body repair sections for the Land Rover Series 1958 - 1984. Laser Cut - 100% accurate, allows replacement of the lower 5” of the rear body back panels. Made from ’5083’ aluminium.
Rear Wing STAYS 330303 330304 - S2,2a & S3 - SWB
Laser cut & CNC folded replacement for Landrover SWB Part no. 330303 & 330304, 3mm Steel, Hot Dip Galvanized. Very high quality.
Series 2/3 Rear Body Stay Brackets (pair)
Pair of Rear Body Wing Stay Brackets for the Land Rover Series 1958 - 1984. Laser cut / CNC formed replacements for part no. 332521. Hot dip Galvanized.
Series 2 2a 3 SWB Galvanized Body Stay Set
Full set of 6 Stay Brackets for the Land Rover Series 58-84 88inch SWB. Laser cut / CNC formed reproductions of parts 330303 *1 330304 *1 / 332521 *2 / 332581 *2
Series 2 2a 3 - MUC8949 / AFC10010 to 330265
Weld on conversion packets - PairMakes Defender type under floor cross members into the series type. Pair of packers to convert Landrover parts numbers MUC8949 into the no longer available Series 2/3 part no. 330265
Series 2/3 88” Rear Body Floor Top Hat Sections
Set of the 3 replacement ‘Top Hat’ sections for repairing the SWB rear floor, these items run longways under the rear body floor.
Truck Cab Filler Plate 346325 for Series 2 2a 3 SWB
Brand new Top quality reproduction of the no longer available Land Rover part no. 346325. This part is often missing when you want to fit a truck cab to a short wheel base (a lot of truck cabs were fitted to the LWB which do not need this part)
Rear Body Light Cover Panels for Series 2/3
Laser cut & CNC bent replacements for Landrover part numbers 330204 & 330205 / MRC2244 & MRC2245
LWB 109” Station Wagon complete Rear Floor
Laser cut reproduction of the longer available Land rover part no. 333560 Made from 5083 alloy & assembled with solid flush aircraft rivets. Very high quality.
LWB 109” Station Wagon Middle / Centre floor
Laser cut reproduction of the longer available part no. 345120 Made from 5083 alloy & assembled with solid flush aircraft rivets. Very high quality.
Replacement Rear Axle Brace
Weld On Repair Panel for the Land Rover SWB 88" Series 2 / 2a Rear Axle Casing.
Items:
Total:
S2/3 Rear Body Corner Bracket
Back Body Tub underside corner stiffener repair panel 100% accurate. Laser cut, made from high strength ‘5251’ aluminium alloy, original thickness.
Replacement Rear Axle Case Brace (short)
Weld On Repair Panel for the Land Rover SWB 88” Series 2 / S2a Rear Axle Casing, this is the short brace outboard of the spring.
S2a SWB Seat Belt Rear Tub Anchor Mounting
Brackets (pair)
Laser cut & CNC bent replacements for LR part number 338752 Fits Series S2a 88” SWB made from 2mm Hot Dip Galvanized Steel.
Rear Body Tub Rubber Mounting Pads 332582 - Pack of 6
Rear Lower Body to Chassis Rubber Mountings. Size 55mm x 32mm x 5mm - Holes Ø 6mm
SWB Fuel Filler Pipe Cover Panel for S2/3
Laser cut & CNC bent replacement for Land Rover part number 330367
‘Cat Flap’ Bracket & Knob for Land Rover Series
Excellent Quality Brand New Replicas of the of the no longer available Land Rover Series part numbers 332393 & 332397.
Laser cut reproduction of the longer available LR part no. 330267. Made from 5083 alloy & assembled with solid flush aircraft rivets. Very high quality.
S2/3 Rear Body Angle Mounting 330271
Laser Cut & CNC Folded replacement for part no. 330271. Very high quality, the bend dimensions & radius are 100% accurate. Made from ‘5083’ high strength marine grade aluminium alloy.
Back / Rear Body Repair Panels (pair)
Pair of Rear Body repair sections for the Land Rover Series 1958 - 1984. Laser Cut - 100% accurate, allows replacement of the lower 5” of the rear body back panels. Made from ’5083’ aluminium.
Rear Wing STAYS 330303 330304 - S2,2a & S3 - SWB
Laser cut & CNC folded replacement for Landrover SWB Part no. 330303 & 330304, 3mm Steel, Hot Dip Galvanized. Very high quality.
Series 2/3 Rear Body Stay Brackets (pair)
Pair of Rear Body Wing Stay Brackets for the Land Rover Series 1958 - 1984. Laser cut / CNC formed replacements for part no. 332521. Hot dip Galvanized.
Series 2 2a 3 SWB Galvanized Body Stay Set
Full set of 6 Stay Brackets for the Land Rover Series 58-84 88inch SWB. Laser cut / CNC formed reproductions of parts 330303 *1 330304 *1 / 332521 *2 / 332581 *2
Series 2 2a 3 - MUC8949 / AFC10010 to 330265
Weld on conversion packets - PairMakes Defender type under floor cross members into the series type. Pair of packers to convert Landrover parts numbers MUC8949 into the no longer available Series 2/3 part no. 330265
Series 2/3 88” Rear Body Floor Top Hat Sections
Set of the 3 replacement ‘Top Hat’ sections for repairing the SWB rear floor, these items run longways under the rear body floor.
Truck Cab Filler Plate 346325 for Series 2 2a 3 SWB
Brand new Top quality reproduction of the no longer available Land Rover part no. 346325. This part is often missing when you want to fit a truck cab to a short wheel base (a lot of truck cabs were fitted to the LWB which do not need this part)
Rear Body Light Cover Panels for Series 2/3
Laser cut & CNC bent replacements for Landrover part numbers 330204 & 330205 / MRC2244 & MRC2245
LWB 109” Station Wagon complete Rear Floor
Laser cut reproduction of the longer available Land rover part no. 333560 Made from 5083 alloy & assembled with solid flush aircraft rivets. Very high quality.
LWB 109” Station Wagon Middle / Centre floor
Laser cut reproduction of the longer available part no. 345120 Made from 5083 alloy & assembled with solid flush aircraft rivets. Very high quality.
Replacement Rear Axle Brace
Weld On Repair Panel for the Land Rover SWB 88" Series 2 / 2a Rear Axle Casing.
Items:
Total:
S2/3 Rear Body Corner Bracket
Back Body Tub underside corner stiffener repair panel 100% accurate. Laser cut, made from high strength ‘5251’ aluminium alloy, original thickness.
Replacement Rear Axle Case Brace (short)
Weld On Repair Panel for the Land Rover SWB 88” Series 2 / S2a Rear Axle Casing, this is the short brace outboard of the spring.
S2a SWB Seat Belt Rear Tub Anchor Mounting
Brackets (pair)
Laser cut & CNC bent replacements for LR part number 338752 Fits Series S2a 88” SWB made from 2mm Hot Dip Galvanized Steel.
Rear Body Tub Rubber Mounting Pads 332582 - Pack of 6
Rear Lower Body to Chassis Rubber Mountings. Size 55mm x 32mm x 5mm - Holes Ø 6mm
SWB Fuel Filler Pipe Cover Panel for S2/3
Laser cut & CNC bent replacement for Land Rover part number 330367
‘Cat Flap’ Bracket & Knob for Land Rover Series
Excellent Quality Brand New Replicas of the of the no longer available Land Rover Series part numbers 332393 & 332397.