Series 1 Parts

Part for Land Rover S1

Series One 86” 88” 107” 109” Floor Plates

Land Rover Series 1 1954-58 Outer floor plates, Laser cut. Allows repair of Landrover part number 306907

Pair of Floor Plates for Land Rover Series 1 80”

Series 1 - 80” 1948-53 floor plates, Brand New – Laser cut  100% accurate, Replaces LR part No. 300878 / 301174 & 300875 / 301170. Modelled on the early patten type which fits both RHD & LHD Made from 5083 marine grade alloy.
1948 to 1953  80 inch
1954 to 1958  86,88,107,109 inch

SWB S1 86” & 88” Rear Body Mounting Angle.

CNC cut & bent replacement for Landrover part no. 303739 Made from high grade 5083 aluminium alloy.

Complete Rear Floor Series One 86” and 88”

Laser cut copy of the longer available Land rover S1 rear floor Made from 5083 alloy & assembled with solid flush aircraft rivets. Very high quality.

Series One 86 88 107 109 Bulkhead Brackets pair

Laser cut & CNC bent replacement for Landrover parts no.  270064 & 270065. Fits all S1 86”, 88”, 107” & 109”Made from 3mm steel and hot dip galvanized.

Series One 86” > Fuel Pump / Voltage Reg. Mounting Plate

Laser cut & CNC bent replacement for Landrover part no. 271863  Fits all S1 86”, 88”, 107” & 109” Made from 2mm steel and hot dip galvanized.
Details

Series 1 Stainless Exhaust Clamp Plate 239715  Pk of 3

Laser cut from 2mm 316 grade stainless steel. Replacement for Land Rover part number 239715 - Much better than the OEM parts. Size approx. 2” * 7/8” Pack of 3
Details Details

Series 1 - High / Low Lever Gaiter Retainer 303817

Brand new top quality reproduction of Land Rover part number 303817 Identical to the OEM part, but made from 316 Stainless steel.
Details Details Details Details

Rear Body Floor Top Hat Sections for Series 1 86” &  88” 

Set of the 3 replacement ‘Top Hat’ sections for repairing the rear floor, these items run longways under the rear body floor.
Details Details

Operating Lever Assembly For Ventilator 303754

 Excellent Quality Brand New Replica of the Landrover Series I, 1954-1957 Operating Lever Assembly For Ventilator 303754
Details

Operating Lever Assembly For Ventilator 303754 Spare Parts

 Excellent Quality Brand New replacement parts for Landrover Series I, 1954-1957 Operating Lever Assembly For Ventilator 303754
Details

Series 1 2 Stainless LUCAS FW2 Wiper Motor Gate - Pair

Laser cut from 2mm 316 grade stainless steel. Replacement for Lucas part number 757551 - Size approx. 3½” * 2” * 1¼”
Details

Clamp Plate for Check Strap 219574

Will fit most Series Land Rovers. Stainless Steel clamp plate for axle check strap. Size 4” * 1 ½” * ⅛”  
Details

Wing Mirror Arm - Stainless Steel

Stainless Steel replacement for part number 562912 - CNC machined. Much better quality than other versions of this part.
Details
Items: Total:

Series 1 Seat Box Sides Repair Panels (pair)

Pair of Land Rover Series 1954 - 1958 Seat box repair sections Laser Cut - 100% accurate, allows replacement seat box sides.
Details

Dashboard / Instrument Panel 238027 for 80”

Faithful reproduction of Land Rover Series 1948 - 1953 80 inch Dashboard / Instrument gauge panel
Details

Series One 86” & 88” Rear Body Back Panels (pair)

Replacement Rear Body Back Panels for the Series One SWB 86” & 88” Made from high grade 5083 aluminium alloy.
Details
Bits4Landys

Brake Pipe Shields - Stainless Steel - Land Rover S1 

Stainless Steel replacements for part numbers 243038 & 243039 - Laser Cut and CNC folded ‘316’ marine grade stainless steel.
Details
© 2017 Bits4Landys Ltd. all rights reserved - Bits4Landys are independent non-franchised manufacturers & suppliers of parts for the Classic Land-Rover Marque LAND ROVER® and DEFENDER® are registered trade marks of Jaguar Land Rover Limited.

Series One 107” & 109” Rear Body Back Panels (pair)

Replacement Rear Body Back Panels for the Series One LWB 107” & 109” Made from high grade 5083 aluminium alloy.
Details

Series 1 Parts

Bits4Landys Part for Land Rover S1

Series One 86” 88” 107” 109” Floor Plates

Land Rover Series 1 1954-58 Outer floor plates, Laser cut. Allows repair of Landrover part number 306907

Pair of Floor Plates for Land Rover Series 1 80”

Series 1 - 80” 1948-53 floor plates, Brand New – Laser cut  100% accurate, Replaces LR part No. 300878 / 301174 & 300875 / 301170. Modelled on the early patten type which fits both RHD & LHD Made from 5083 marine grade alloy.
1948 to 1953  80 inch
1954 to 1958  86,88,107,109

SWB S1 86” & 88” Rear Body Mounting Angle.

CNC cut & bent replacement for Landrover part no. 303739 Made from high grade 5083 aluminium alloy.

Complete Rear Floor Series One 86” and 88”

Laser cut copy of the longer available Land rover S1 rear floor Made from 5083 alloy & assembled with solid flush aircraft rivets. Very high quality.

Series One 86 88 107 109 Bulkhead Brackets pair

Laser cut & CNC bent replacement for Landrover parts no.  270064 & 270065. Fits all S1 86”, 88”, 107” & 109”Made from 3mm steel and hot dip galvanized.

Series One 86” > Fuel Pump / Voltage Reg. Mounting Plate

Laser cut & CNC bent replacement for Landrover part no. 271863  Fits all S1 86”, 88”, 107” & 109” Made from 2mm steel and hot dip galvanized.
Details

Series 1 Stainless Exhaust Clamp Plate 239715  Pk of 3

Laser cut from 2mm 316 grade stainless steel. Replacement for Land Rover part number 239715 - Much better than the OEM parts. Size approx. 2” * 7/8” Pack of 3
Details Details

Series 1 - High / Low Lever Gaiter Retainer 303817

Brand new top quality reproduction of Land Rover part number 303817 Identical to the OEM part, but made from 316 Stainless steel.
Details Details Details Details

Rear Body Floor Top Hat Sections for Series 1 86” &  88” 

Set of the 3 replacement ‘Top Hat’ sections for repairing the rear floor, these items run longways under the rear body floor.
Details Details

Operating Lever Assembly For Ventilator 303754

 Excellent Quality Brand New Replica of the Landrover Series I, 1954-1957 Operating Lever Assembly For Ventilator 303754
Details

Operating Lever Assembly For Ventilator 303754 Spare Parts

 Excellent Quality Brand New replacement parts for Landrover Series I, 1954-1957 Operating Lever Assembly For Ventilator 303754
Details

Series 1 2 Stainless LUCAS FW2 Wiper Motor Gate - Pair

Laser cut from 2mm 316 grade stainless steel. Replacement for Lucas part number 757551 - Size approx. 3½” * 2” * 1¼”
Details

Clamp Plate for Check Strap 219574

Will fit most Series Land Rovers. Stainless Steel clamp plate for axle check strap. Size 4” * 1 ½” * ⅛”  
Details

Wing Mirror Arm - Stainless Steel

Stainless Steel replacement for part number 562912 - CNC machined. Much better quality than other versions of this part.
Details
Items: Total:

Series 1 Seat Box Sides Repair Panels (pair)

Pair of Land Rover Series 1954 - 1958 Seat box repair sections Laser Cut - 100% accurate, allows replacement seat box sides.
Details

Dashboard / Instrument Panel 238027 for 80”

Faithful reproduction of Land Rover Series 1948 - 1953 80 inch Dashboard / Instrument gauge panel
Details

Series One 86” & 88” Rear Body Back Panels (pair)

Replacement Rear Body Back Panels for the Series One SWB 86” & 88” Made from high grade 5083 aluminium alloy.
Details

Brake Pipe Shields - Stainless Steel - Land Rover S1 

Stainless Steel replacements for part numbers 243038 & 243039 - Laser Cut and CNC folded ‘316’ marine grade stainless steel.
Details
© 2017 Bits4Landys Ltd. all rights reserved - Bits4Landys are independent non-franchised manufacturers & suppliers of parts for the Classic Land-Rover™ Marque LAND ROVER® and DEFENDER® are registered trade marks of Jaguar Land Rover Limited.

Series One 107” & 109” Rear Body Back Panels (pair)

Replacement Rear Body Back Panels for the Series One LWB 107” & 109” Made from high grade 5083 aluminium alloy.
Details